Pineapple Tenor Ukulele — Beginner Build Class

jigs · wedge spreaders

← All jigs

Wedge spreaders (pineapple tenor)

Bars that press the sides home against the mold walls while the blocks and linings go in — the same bars hold the rim's shape when it comes out of the mold. No turnbuckles: one wedge and a wedge-shaped foot do the spreading. Build them before Session 5, with the body mold.

Spreader plan view: body outline with upper and lower spreader bars across the width

Plan view, neck at the top. Two spreaders: upper and lower. Each bar is on the left; the green block at the right end is the wedge + foot-wedge.

How it works

The bar spans the rim's inner width with a cork pad on its fixed end. At the other end, the wedge sits against the bar and the foot-wedge against the side, cork face out. The two are mirror tapers (1:8) — together a rectangle that gets thicker as the wedge is tapped down, spreading bar and foot apart. The 1:8 taper is self-locking, so the wedge stays put when you let go. To release, pull the wedge up by its heel — it stands proud of the rim.

Dimensions

Three pieces of wood and two cork pads per spreader. Measure your rim — bent sides vary, so the table is the nominal starting point from the template outline, and the wedge takes up the difference.

Downloads

Spreaders drawing PDF

The drawing has the plan, the wedge mechanism detail, the dimensions table, and the parts list.